The following is a
suggested care & cleaning for the finishes that may be present inside the
elevator and based on typical products for use by building owners. Refinishing
or deep cleaning should only be performed by qualified professionals.
Satin Finish Stainless
Steel : It is advised that a non-oily metal polish such as, Stainless Steel
Magic®, available at Home Depot, be used. Try to use small amounts as a little
goes a long way. Buff with a dry towel in long vertical stokes. Be careful to
keep this, or any solutions away from the elevator fixtures (buttons, key
switches, etc.) to avoid damage to those components
Mirror Finish Stainless
Steel : We recommend using any good quality glass cleaner. Again, it's very
important to refrain from using a swirling stroke. Even though considered
mirrored, it does have a grain which usually runs vertically. Be careful to
keep this, or any solutions away from the elevator fixtures (buttons, key
switches, etc.) interior elevetor design.
Satin Finish or
Polished Muntz (Bronze): Use only clear water and a clean dry towel. Spray
or wipe a damp towel in long vertical strokes. Buff with a dry towel in long
vertical strokes. Avoid using a swirling motion even on mirrored finishes.
Avoid using paper towels, as they will eventually scratch the surface. If
streaking occurs, use a mixture of 90% water and 10% denatured alcohol. This
will increase the drying time. DO NOT use any metal polish on lacquered
surfaces. They will eventually break down the finish resulting in expensive
refinishing. Be careful to keep this, or any solutions away from the elevator
fixtures (buttons, key switches, etc.)
Plastic Laminate: The
decorative surface may be cleaned with warm water and mild soaps, such as those
used for hands or dishes. Do not use cleansers that contain abrasives, acids or
alkalis; elevator wall panels they will damage the decorative surface. Remove stubborn stains with a
1-minute exposure to hypochlorite bleach such as Clorox®, followed by a clean
water rinse. Extended exposure could cause discoloration so use cautiously.
Heading home to your high-rise luxury condo at the end of the day, you'd
want a calming elevator cab interior. Heading to work in an office building
each morning, you'd want to be energized.
If the designer has
incorporated the energy of the building into the design, then many individuals
are subconsciously being prepared for their business at hand.
No comments:
Post a Comment